No text available.

The Toro has been mostly dismantled. Theres a lot of surface but there are no holes in the sheet metal.

The blower was moved to the annex after the initial sanding and priming was complete. The annex provides a warmer work area.

I stumbled across a set of replacement bearings for the auger while browsing for something else. Cool!

The top paddle is new. The bottom paddle is a year old.

The first paddle has been installed.

The auger axle components laid out in order of installation.

Left side auger axle assembled and ready to be installed.

Right side auger assembly ready to be installed.

The auger axle is in place.

The auger pully and belt are in place.

The auger drive cable broke 1 too many times and couldn't be jerry-rigged any more.

I had no reference for reconnecting the springs on the scraper bar. This is the best I could come up with using trial and error.

Old and new scraper bars.

The new scraper bar is in place.

Front view with everything back in place.

Ready for the wheels and skins.